News
-
Requirements for installation site of busbar machine
Please choose a busbar bending machine spacious, clean and level place and pay attention to the following: 1. Within the moving range of materials, avoid obstacles to avoid accidents. 2.The place space of the equipment should be able to carry out maintenance, repair and other operations, and the height should be 1500mm higher than the […]
-
Matters needing attention when bus bar equipment needs to be transported
1.When the machine needs to be lifted during transportation or installation, it should be hung on the special lifting bolts under the machine with qualified lifting tools (Note: the lifting bolts must be tightened). Special requirements: pay attention to the overall balance of the equipment when lifting, and ensure that the equipment will not be […]
-
Requirements for adding and discharging hydraulic oil for busbar machine equipment
The busbar bending machine is equipped with automatic oil filling and discharging device. The following is a brief description of the use of the problem: Open the tool box, insert one end of the hose into the oil filling port, and put the other end into the new oil barrel. Put the switch in the […]